UP | HOME

Sample Stabilization for Tomography Experiments in Presence of Large Plant Uncertainty
Dehaeze Thomas, Magnin-Mattenet Muriel and Collette Christophe

Abstract:

A new low emittance lattice storage ring is under construction at the ESRF. In this new instrument, an upgraded end station for ID31 beamline must allow to position the samples along complex trajectories with a nanometer precision. In order to reach these requirements, samples have to be mounted on high precision stages, combining a capability of large stroke, spin motion, and active rejection of disturbances. First, the end station will be presented with the associated requirements. However, the precision is limited by thermal expansion and various imperfections that are not actively compensated. Our approach is to add a Nano Active Stabilization System (NASS) which is composed of a 6DoF Stewart platform and a 6 DoF metrology system. A 3D model of the end station updated with experimental data is developed. As the mass of the samples may vary by up to two orders of magnitudes, robust control strategies are required to address such plant uncertainty. The proposed control strategy are presented and applied on the developed model by conducting time domain simulations of tomography experiment in presence of instrumentation noise and system uncertainty.

Paper (link)

The paper has been created Org Mode (generating LaTeX code) under Emacs.

Tikz Figures (link)

All the figures for the paper have been generated using TikZ.

Poster (link)

The poster has been created using the tikzposter package for beamer.

Talk (link)

This work has been presented at MEDSI 2018.

How to cite this paper

To cite this paper use the following bibtex code.

@inproceedings{dehaeze18_sampl_stabil_for_tomog_exper,
  author =       {Thomas Dehaeze and M. Magnin Mattenet and Christophe Collette},
  title =        {Sample Stabilization For Tomography Experiments In Presence Of
                  Large Plant Uncertainty},
  booktitle =    {MEDSI'18},
  year =         2018,
  number =       10,
  pages =        {153--157},
  doi =          {10.18429/JACoW-MEDSI2018-WEOAMA02},
  url =          {https://doi.org/10.18429/JACoW-MEDSI2018-WEOAMA02},
  address =      {Geneva, Switzerland},
  isbn =         {978-3-95450-207-3},
  language =     {english},
  month =        {Dec},
  publisher =    {JACoW Publishing},
  series =       {Mechanical Engineering Design of Synchrotron Radiation
                  Equipment and Instrumentation},
  venue =        {Paris, France},
}

You can also use the formatted citation below.

Dehaeze, T., Mattenet, M. M., & Collette, C., Sample Stabilization For Tomography Experiments In Presence Of Large Plant Uncertainty, In MEDSI’18 (pp. 153–157) (2018). Geneva, Switzerland